| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat Belt | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003H4Z000X |
| Title: SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL CENTER SEAT OUTER BELT ASSEMBLY
|
(a) Align the center seatback frame claws with the center seat outer belt retractor positioning holes. |
(b) Install the center seat outer belt assembly with the 4 nuts.
- for Nut A
Torque: 42 N·m (428 kgf·cm, 31 ft·lbf)
- for Nut B
Torque: 5.5 N·m (56 kgf·cm, 49 in·lbf)
(c) Engage the cable with the cable tie.
2. INSTALL SEATBACK COVER WITH PAD
3. INSTALL ARMREST ASSEMBLY
4. INSTALL REAR SEAT SHOULDER BELT HOLE COVER NO. 3
5. INSTALL REAR SEAT HEADREST SUPPORT
6. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
7. INSTALL REAR SEATBACK LOCK STRIKER COVER
8. INSTALL REAR SEAT SHOULDER BELT HOLE COVER NO. 2
9. INSTALL REAR SEATBACK LOCK BEZEL UPPER
10. INSTALL REAR SEAT SHOULDER BELT HOLE COVER NO. 1
11. INSTALL REAR SEAT CUSHION UNDER COVER
12. INSTALL CENTER SEAT HINGE COVER RH
13. INSTALL CENTER SEAT HINGE COVER LH
14. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY
15. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
16. INSTALL CENTER SEAT CUSHION ASSEMBLY
17. INSTALL REAR SEAT CUSHION HINGE COVER UPPER RH
18. INSTALL REAR SEAT CUSHION HINGE COVER UPPER LH
19. INSTALL REAR CENTER SEAT ASSEMBLY
(a) Install the rear center seat assembly
.
|
|